Timers are available for hire, We have the following available:

• C420 Wire Free
• C840 Wire Free
• 2, C700 Timers Wire Free
• C640 Wire Free
• 5 Digit 10" Public Display
• 6 Digit 10" Public Display
• Cable gates available (uses 3 core cable, if you plan to use it over long distances).
• We also have a 4 clock system working with start, stop gates wirelessly (time 4 runners at the same time). Public display not available for this.

Timers.
Two models of timer are available.
The timers are not on the FEI approval list for international competitions but are used for BSJA.
C420 cable timer. No longer Available Good simple timer  We have this Timer to hire with wire free gates!
C840 professional timer. This is a state of the art timer providing a wide range of advanced features, including countdown timer, two-phase timing, results calculation and electronic bell (see specification sheet for more details). It is powered by an internal rechargeable battery or can be connected to an external 12 volt battery or a mains supply using the adapter provided.   £3,450 including 2 sets of wireless gates (2011 Prices excluding VAT) We have this Timer to hire!
Gates. Infra-red heads and reflectors ('gates') are used at the start and finish lines to automatically start and stop the timer. Timing sets are normally supplied with two gates for start and finish (that is, 2 heads, 2 reflectors and 4 tripods), although one gate may be used for both start and finish. The infra-red system has the advantage of being very easy to use and the design of the optical system makes our eg heads particularly easy to set up. Two types of head are available, those that are connected to the timer by cable and 'wire-free' heads that use radio to send the start/finish signal to the timer.
K530 cable gate. These heads connect to the timer by 3 core cable, which may be up to 500 metres in length. The heads are powered from the timer - no other power is required. The K530 has a maximum distance of 20 metres between head and reflector.
K531 wire-free gate. This head uses a radio transmitter instead of a cable to connect to the timer. There are no cables to lay so changing the course is much simpler! There are two channels, enabling two rings to be used side by side. The head is powered by internal rechargeable batteries which give 24 hours continuous use between charges. The range of the radio signal is 200 metres (line of sight). The maximum distance between head and reflector is 30 metres. The heads can also be connected to the timer by cable if required. Legal for use in Europe without a site licence.
Displays. Different sizes of public display are available and can be used with any of the timers. Several displays may be connected to one timer to improve coverage. All displays are powered either by external 12 volt battery or mains adapter.
D504 display. No longer available
D505 display. This displays has 5" high red illuminated numbers, easily viewable at 50 metres. The brightness can be altered for indoor or outdoor conditions. D505 - Size: 910mm x 225mm x 50mm. Weight 6.5kg £1,150 (2011 Prices excluding VAT)
D510 and D610 flap displays. These displays show fluorescent yellow numbers making them attractive and highly visible even in bright sunlight. The digits are 10" high, easily viewable at 100 metres. The D610 can show time to one thousandth of a second when used with the C840 timer. The case is of welded steel making it very weather resistant, with a steel lid for protection during transportation. Mounting brackets are provided. D510 - Size:1300mm x 350mm x 100mm. Weight 25kg £2,200 (2011 Prices excluding VAT) D610 - Size:1530mm x 350mm x 100mm. Weight 30kg £2,700 (2011 Prices excluding VAT) We have 5 and 6 digit displays for hire if you do not wish to make the investment
Accessories.
K30 Marathon timer / Clock. Can be used to show marathon timing, the time of day, or countdown timing on a normal public display. It is powered from the display but contains a rechargeable battery to retain timekeeping when it is not connected. When switched to marathon mode it will time in seconds up to 9 hours. There are start, stop and zero buttons, and it is possible to set the time in order to synchronise with other clocks. When switched to clock mode you can select 12 or 24 hour display. You can also select whether to shuttle between time and temperature or display the time continuously.
K60 Remote Start/Stop/Bell buttons (for C840 series timers only).
D60 Remote Start/Stop/Bell buttons with lcd display (for C840 series timers only).
Video overlay generator. This unit enables timing and faults, together with a sponsor's message, to be inserted into a television picture for broadcast, closed-circuit relay or video recording. The equipment consists of an interface for connecting the timer to a computer, an overlay generator for connecting a computer with the video signal, and the operating software. A PC computer is also required - this is not supplied. The computer keyboard is used for editing the sponsor's name (max 25 letters) which then appears when the timer stops, and remains on screen until the timer is zeroed. The keyboard is also used to enter the faults. The positions on the screen of the time, faults and message can all be independently changed. The size and font of the characters is fixed and cannot be altered.
Please give us a call systems are available for hire.