Our conference packages are divided into two types.

The first an integrated conference management system manufactured by Paso, of which we have a 21 unit system for hire.  Suitable for up to 60 delegates (3 sharing) this is ideal for a large board meeting or AGM.  By adding a radio mic and extra speakers an audience may participate making this ideal for public meetings, AGM's, ect.
I have listed the equipment below so you will have a more visual idea of the units. Trade inquires welcome to hire this system.

The CS1060 system, based on advanced digital technologies, was designed to control a maximum of 98 Delegate's microphone stands, one Chairman's microphone set and one Secretary's microphone stand.

Like the CS1100 system, on which it is based, it can be used to manage four different conference modes: automatic conference, manual conference, open conference and conference with direct calls.

The basic system consists of a CS1060 central power supply unit, a CL1060 management console, B1060 Delegate microphone sets and the B1060P Chairman's microphone stand.

CS 1060 CENTRAL UNIT

The CS1060 central unit contains the power and power supply circuits for the whole system. It has one input for a microphone to be used by the audience and one Tape/Aux input with level control.

It can drive an external amplifier and output a recordable signal.
There is also a level control for the signals for the microphone stands, as well as a socket for driving an illuminated display board.

CL1060 CONSOLE

The CL1060 Console controls, stores and displays all the queuing operations, the sequence of delegates queued to speak, enabling of the stations and resetting of the queue, if required.

It controls all the phases of the type of conference chosen.

MICROPHONES SETS




B1060-D     B1060-S     B1060-P

The second system available has a more traditional approach based around a large audience rather than delegate's.
A mixer, microphone's for lectern and chairperson, radio mic's for the speakers and audience questions and finally loudspeakers on stands place to the side of the viewing audience.

The photo below shows a typical meeting for this setup
In use at this event were chair persons mic on a stand above table.
Lectern mic.
2 tie clip radio mic's for guest speakers.
2 handheld radio mic's for audience questions.
A pair of bose loudspeakers.
Graphic equalizer.
Feedback destroyer.
And finally a mixing desk situated at the back of the audience for complete control over the sound.